SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
PCB MANUFACTURING ENGINEER
SpaceX demands a new type of supply chain as we drive towards humanity on Mars. We require our suppliers to provide premium quality with rapidly evolving designs at increasingly ambitious volumes. We are actively looking for candidates who possess comprehensive knowledge of manufacturing and quality tools and have unrelenting motivation to enable suppliers for success. This position will support our Starship program and requires a combination of proven leadership and technical capabilities.
This is a highly technical position that requires practical experience in manufacturing engineering and new product development through stabilized production for an array of fabrication processes (components and assemblies) used in rockets and rocket engine avionics. The ideal candidate will have a broad and thorough understanding of electronics fabrication methodologies including printed circuit boards (PCBs), engineering laminates, electrochemical processes, printed circuit board assemblies (PCBAs), and/or EEE components with their associated processes. This candidate must have the desire and capability to take on new challenges in unfamiliar areas to help enable our mission to Mars.
RESPONSIBILITIES:
- Serve as the technical point of contact for assigned parts and assemblies of the rocket, solving emergent challenges at suppliers, and mitigating risk to the manifest by addressing high-impact manufacturing and quality challenges
- Own the new product introduction of new parts and assemblies on the rocket, including identifying and reviewing suppliers, and developing a reliable process for ramping manufacturing to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier
- Collaborate with design, R&D, commercial supply chain, hardware reliability, and production teams to effectively manage product portfolio
- Analyze production and process data to drive technical product improvements and related engineering drawing updates, reducing risk and potential defect opportunities as well as improving manufacturability, manufacturing lead times, and cost
- Review issues on assigned parts and solve to the root cause, implementing changes at the supplier, at SpaceX or both, as appropriate, drive further actions to closure, and re-source to new suppliers where appropriate
- Create and disposition issue tickets where needed, working with engineering counterparts to implement, but not limited to, required re-work, repair or use as-is disposition
- Lead containment activities on assigned parts, working with cross-functional counterparts to agree on scope, path forward and ultimate resolution
- Drive supplier root cause failure analysis and corrective actions associated with any quality gaps, escapes, or containments
- Support procurement team to strategically source parts matched with supplier capabilities by reviewing and assessing supplier manufacturing processes and quality systems
- Demonstrate innovation, technical excellence, attention to detail, self-direction and courage to push the technical envelope which is conventionally held in the industry.
- Become thoroughly familiar with your assigned parts and the processes that make up the overall assembly and become the primary point of contact for supply chain related defects on your parts
BASIC QUALIFICATIONS:
- Bachelor’s degree in an engineering discipline
- 1+ years of experience with manufacturing or process engineering role
PREFERRED SKILLS AND EXPERIENCE:
- Electronics manufacturing experience, preferably with printed circuit boards (PCBs), engineering laminates, electrochemical processes, printed circuit board assemblies (PCBAs), and/or EEE components
- Working knowledge of PCBA processing, such as pick and place machines, reflow ovens, wave/selective soldering systems, x-ray and AOI systems, and depanelization equipment
- Understanding of PCB stack up material selection and performance characteristics
- In depth knowledge of industry specifications and requirements (IPC-2221, IPC-A-600, IPC-A-610, etc.)
- Experience drafting and presenting Design for Manufacturing (DFM) improvement suggestions to product Responsible Engineers
- Experience with assessing supplier technical capability both from an equipment, operations, and personnel perspective through onboarding efforts and audits
- Working knowledge of supplier quality processes (Production Part Approval Process, Advanced Product Quality Planning, First Article Inspection Reports, etc.)
- Disciplined approach to problem solving – i.e. 8D
- Experience with quality systems (ISO 9000/TS/AS9100)
- Experience with 3D modeling/CAD software, and engineering drawing creation
- Experience with Pareto analysis, root cause, corrective action, and PFMEAs
- Knowledge of lean concepts
- Knowledge of statistical techniques and methods (Minitab, design of experiments, Six Sigma, etc.)
- Ability to succinctly communicate status and needed actions, often urgently, to all levels of the organization
- Experience with sharing information and influencing others (strong written and verbal communication skills, able to liaise cross functionally, internally and externally, make presentations to team members and management)
ADDITIONAL REQUIREMENTS:
- Willingness to work extended hours, some nights and/or weekends when needed
- Ability to travel: up to 25-50% work week travel (domestic and international)
- Valid driver’s license
COMPENSATION AND BENEFITS:
Pay Range:
Level 1: $100,000.00 - $130,000.00
Level 2: $115,000.00 - $160,000.00
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law.
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.